Today I narrowed and sleeved a steering bar… A bundle of four one metre lengths of seamless steel tube, 25mm ID and 3mm Wall, I used these on the big buggy to sleeve the steering bars, so I knew these would work well over a narrowed bar… Two standard length steering bars… Eventually removed the… Continue reading Steering Bar
Spent the day today reassembling the rear axle (Yes, it’s a front axle… but the buggy is going to be four wheel steer, so two narrowed front axles are being used) This is going to be the REAR axle, despite obviously being a narrowed front axle… the buggy is going to be four wheel steer… Continue reading Axle Rebuilt
After aTEN month siesta whilst my right foot was undergoing reconstructive surgery… I had my first day back in the garage! 🙂 I sat on a stool for a few hours… .. refurbishing radius arms! Before and after! Not the rubber bushes have been drilled to allow a little more flex… an idea I saw… Continue reading Back to it!
Still in hospital, but filling my time thinking about and sketching lil-bugga ideas… most recently the drivetrain… you’ll hopefully have read and remember I have already narrowed two Jimny front axles – I’d already decided the one for the rear will be an ”open” Diff, ie. stock with no traction aids, but with tougher Trailgear… Continue reading Drivetrain Thoughts
OK, you’ll probably think this is a mad idea, but here goes… the whole idea of this “Lil’Bugga”buggy build idea was to build a small, cheap US crawler inspired buggy, tube frame, single seater built with as many standard / cheap / replaceable (Suzuki Jimn) parts that I’m fairly used to fiddling with, but on… Continue reading Rear Steer Idea
so, my mind wanders next to the controls for the lil-bugga buggy… Lets look at (one of) the ultimate buggies first then for some inspiration, Lasernut’s Pretty Penny… I’ve labelled some of the controls in the cab there – G – GearboxT – Transfer Box it’s an Atlas box so there’s two levers to select… Continue reading Controls
My first attempt at a YouTube video for ”lil-buggy”, using an iPad App I’ve spent the morning learning from my hospital bed… I’m hoping to do actual narrated videos in the future, unless i look a bit of a dick in-front of the camera… Yes, I’ll probably stay behind the camera! LOL
An idea I had the other day and made a sketch of it… a way of letting the standard Jimny front springs dislocate with the long Grand Vitara shocks I’ve got in stock for this build… (same front and rear as I’m using two narrowed Jimny front axles). Before I reveal my sketch I must… Continue reading Dislocating Spring / Bump Stop Idea
I’m still incarcerated in hospital, so I’ve been doing a lot of research about suspension geometry and applying that – with looking at other buggies on the internet – and sketching on a drawing App Ive added to my trusty boredom- busting iPad… So the blue lines are tube work, the bottom two black lines… Continue reading Developing Ideas
Something went wrong. Please refresh the page and/or try again.
Follow My Blog
Get new content delivered directly to your inbox.